Which radio is in your Ford Transit Connect?
The Transit Connect has had 3 sets of radios since 2002, from the 4500 RDS, 6000 CD and Sony CD to the DAB, SYNC and touchscreen radios. Find yours by year below, but go by the serial: radios get swapped, and the free check reads it for you.
How to find your Ford Transit Connect radio serial number
On the screen
- Turn the ignition on and switch the radio on.
- Hold buttons 1 and 6 together for 2–3 seconds.
- Watch the screen: the serial scrolls past, usually last. Write down the letter and 6 numbers.
- Nothing? Try buttons 2 and 6 instead. Still nothing? The serial is also on a label on the radio itself.
On the label
The serial is also printed on a label on the top or side of the radio. It comes out with a pair of radio removal keys. Which keys, and where they go: how to remove a car radio.
Photograph the label rather than copying it by hand — 0 and O, 1 and I are easy to mix up.
Tips for your Ford Transit Connect
- Hold buttons 1 and 6 with the radio on to see the serial.
- Keep the ignition on while you type the code in.
What your serial looks like
-
V123456Ford V-series (6000 CD)V and 6 numbers Instant -
M123456Ford M-series (Visteon)M and 6 numbers Instant -
Z123456Ford Z / A serials (2008 on)Z or A and 6 numbers Not available
How to enter your Ford Transit Connect radio code
- Press button 1 until the first number of your code shows. Do the same with buttons 2, 3 and 4.
- Press button 5 to finish (Land Rover: the right-hand arrow button).
- Code not accepted? The screen shows LOCKED and a number. Stop before it gets to 10 and read our locked radio help.
- Press button 1 until the first number of your code shows. Do the same with buttons 2, 3 and 4.
- Press button 5 to finish (Land Rover: the right-hand arrow button).
- Code not accepted? The screen shows LOCKED and a number. Stop before it gets to 10 and read our locked radio help.
Every button press, and what the screen does if the code is wrong: How to enter a Visteon radio code.
If your Ford Transit Connect radio says LOCKED, WAIT or SAFE
| Radio | What to do |
|---|---|
| Ford V-series (6000 CD) | LOCKED 10: leave the radio and ignition on for about an hour, then try again, or hold button 6 for 10 seconds to get 3 more tries. LOCKED 13 means those tries are used up: the radio then needs a Ford dealer or a radio specialist. |
| Ford M-series (Visteon) | LOCKED 10: leave the radio and ignition on for about an hour, then try again, or hold button 6 for 10 seconds to get 3 more tries. LOCKED 13 means those tries are used up: the radio then needs a Ford dealer or a radio specialist. |
What LOCKED, WAIT and SAFE mean, and how long to wait →
Ford Transit Connect radio code questions
Where is the Transit Connect radio serial?
Hold buttons 1 and 6 with the radio on. The serial is a letter and 6 numbers, and it is also on the radio’s label.
My Connect radio serial starts with Z.
Not at the moment. Fords from about 2008 have a serial starting with Z, and from about 2018 with A. These work differently, and our free check tells you straight away, before you pay.
Can you do every Ford Transit Connect radio?
For 2002–2008, yes: the code appears on screen as soon as you have paid; for 2008–2013, some of the radios but not the usual one; for 2013 on, not at the moment. The free check tells you which yours is before you pay.
Which radio does my Ford Transit Connect have?
It depends on the year. 2002–2008 (First Transit Connect): 4500 RDS, 6000 CD and Sony CD. 2008–2013 (First Transit Connect, facelift): 6000 CD and Sony CD. 2013 on (Later Transit Connect): DAB, SYNC and touchscreen radios. Radios were often swapped, so the serial on yours is what counts.
What does the serial look like on a Ford Transit Connect?
2002–2008: V and 6 numbers (M on some early vans). 2008–2013: Z on most, V on some early vans. For example V123456.
Do I have to take the radio out of my Ford Transit Connect?
Usually not: with the radio on, hold 1 and 6 and the serial shows on the screen.
How do I enter the code on a Ford Transit Connect?
Press preset 1 until the first digit shows, then 2, 3 and 4 for the rest. Ten presses brings a digit back round to zero. Press 5 to submit — on Land Rover and other Visteon units it is the right-hand search arrow instead, not preset 5.
Updated October 2026