Which radio is in your Renault Twingo?
Renault fitted different radios over the years. Find your Twingo’s years below, but go by the serial: radios are often swapped, and the free check reads it for you.
How to find your Renault Twingo radio serial number
Most Renault Twingo radios show their serial on the screen, so you don’t need to take anything apart. The serial tells us exactly which code your radio needs.
On the screen
- Switch the radio on.
- Hold buttons 1 and 6 together for about 5 seconds.
- The screen shows a letter and 3 numbers (like A123). That is your precode.
- Nothing shows? Check the separate screen on top of the dashboard, or look for "PRE CODE" on the radio’s label.
On the label
The serial is also printed on a label on the top or side of the radio. Most radios slide out with a pair of radio removal keys (a few pounds from any car parts shop). Push them into the slots on the front until they click, then ease the radio forward. Some have screws to undo first.
Take a photo of the label rather than copying it by hand: it’s easy to mix up 0 and O, or 1 and I.
Tips for your Renault Twingo
- The Twingo was only sold new in the UK from 2007, so any older one here is an import.
- Hold 1 and 6 for about five seconds with the radio asking for the code.
- A MediaNav touchscreen has no precode: its code is tied to the car.
What your serial looks like
-
A123Renault precode1 letter and 3 numbers Instant
Can’t find it or can’t read it? Send us a photo of the label: £9.99, with a full refund if we can’t find your code.
How to enter your Renault Twingo radio code
Once you have your code, key it in like this. The example below shows the button presses. Your order page shows the same steps next to your code.
Renault precode
- Use buttons 1, 2, 3 and 4 to set each number.
- Hold button 6 for about 5 seconds until the radio beeps.
If your Renault Twingo radio says LOCKED, WAIT or SAFE
Each wrong code makes the radio wait longer before the next try, and some radios lock for good after too many. Don’t guess: get the right code first, then follow the steps for your radio.
| Radio | What to do |
|---|---|
| Renault precode | WAIT or ERROR — leave the radio on for 30–60 minutes and try again. |
What LOCKED, WAIT and SAFE mean, and how long to wait →
Why we use your radio’s serial, not your number plate
A radio code belongs to the radio, not the car. A dealer usually looks it up from the Renault Twingo’s number plate or VIN (the 17-character number in your logbook), which only works if the car still has the radio it left the factory with. Radios are often swapped under warranty, upgraded, or changed by a previous owner.
The serial number is printed on the radio itself, so the code we give you matches the radio in front of you. It is also how we can check it for free before you pay. Main dealers often charge £30–£130, and you usually have to book the car in.
Renault Twingo radio code questions
Where is the Twingo radio precode?
Hold buttons 1 and 6 with the radio on. If nothing shows, the precode is on the label on the radio.
My Twingo has a touchscreen.
MediaNav and R-Link screens are matched to the car, so there is no precode to work from. A Renault dealer can help with those.
Will the free check tell me before I pay?
Yes. Type the precode in and it says straight away whether we have your code.
How much is a Renault Twingo radio code?
£9.99 per code. The free check comes first, so you only pay once we know we can do it, and you get your money back if the code doesn’t work.
How long does it take?
Most Renault Twingo codes appear on screen the moment you’ve paid, and we email you a copy. If yours has to be looked up by our team, we email it within 2 hours and tell you before you pay.
What if the code doesn’t work?
Check the serial first: 0 and O, or 1 and I, are easy to mix up. Still stuck? Tell us from your order page and we’ll put it right or refund you in full.
Updated September 2026