We can’t do this one

Jeep Cherokee radio

How to tell it’s this radio, find its serial and enter the code.

When it’s locked, the display shows

CODE ----
Serial looks like
TQ1AA1500E288414 letters and numbers
Show the serial
On the label on the radio
Taking it out
Needed to read the label

No photo of this radio yet. Match yours by what the display says and the shape of the serial.

Is this your radio?

Fitted toJeep Cherokee and Grand Cherokee.
Radio namesCherokee radios
Serial14 letters and numbers, for example TQ1AA1500E2884
Read them from the label on the radio.
When lockedThe display shows CODE ----

Find the serial

  1. Take the radio out.
  2. Copy the serial from the label on the radio: 14 letters and numbers.

It isn’t shown on the display, so read it from the label on the radio’s case (usually the top or side).

Taking the radio out

The radio has to come out so you can read the label. Most slide out with a pair of radio removal keys (a few pounds from any car parts shop); some are held in by screws behind the trim. Photograph the label rather than copying it by hand.

RADIOPush both keys in until they click, then pull the radio forward

We can’t produce this code

Check the handbook wallet for a code card, or ask a main dealer with your V5C and proof of ID.

Enter the code

  1. Set each number with the numbered buttons, then confirm.
  2. Code not accepted? Email us and say whether your radio has 5 or 6 numbered buttons.

Locked out?

Too many wrong codes lock the radio for a while. Leave it switched on with the ignition on until the display changes, then try again.

What LOCKED, WAIT and SAFE mean, and how long to wait →

Brand pages

This radio is covered on: Jeep radio code.