Which radio is in your Jeep Wrangler?
Jeep fitted different radios over the years. Find your Wrangler’s years below, but go by the serial: radios are often swapped, and the free check reads it for you.
How to find your Jeep Wrangler radio serial number
The serial isn’t shown on the screen: it is printed on a label on the radio itself. The serial tells us exactly which code your radio needs.
On the label
- Take the radio out.
- Copy the serial from the label on the radio: 14 letters and numbers.
Take a photo of the label rather than copying it by hand: it’s easy to mix up 0 and O, or 1 and I.
Most radios slide out with a pair of radio removal keys (a few pounds from any car parts shop). Push them into the slots on the front until they click, then ease the radio forward. Some have screws to undo first.
Tips for your Jeep Wrangler
- Photograph the label — the serial length tells us which radio it is.
- A Uconnect touchscreen is matched to the vehicle, so there is no code to buy.
- Many US-market radios have no code, which catches out imported Wranglers.
What your serial looks like
-
TQ1AA1500E2884Jeep Cherokee14 letters and numbers By email -
1234Chrysler / Jeep / Dodge Panasonic TM94 numbers Instant -
10004Chrysler / Jeep / Dodge button code4 or 5 numbers Instant -
E3NEChrysler / Dodge VP4 letters and numbers Instant
Can’t find it or can’t read it? Send us a photo of the label: £9.99, with a full refund if we can’t find your code.
How to enter your Jeep Wrangler radio code
Once you have your code, key it in like this. Your order page shows the same steps next to your code.
- Set each number with the numbered buttons, then confirm.
- Code not accepted? Email us and say whether your radio has 5 or 6 numbered buttons.
- Set each number with the numbered buttons, then confirm.
- Your code is a list of buttons: press them in order.
- Code has a 6 but your radio only has 5 buttons? Email us.
- Set each number with the numbered buttons, then confirm.
If your Jeep Wrangler radio says LOCKED, WAIT or SAFE
Each wrong code makes the radio wait longer before the next try, and some radios lock for good after too many. Don’t guess: get the right code first, then follow the steps for your radio.
What LOCKED, WAIT and SAFE mean, and how long to wait →
Why we use your radio’s serial, not your number plate
A radio code belongs to the radio, not the car. A dealer usually looks it up from the Jeep Wrangler’s number plate or VIN (the 17-character number in your logbook), which only works if the car still has the radio it left the factory with. Radios are often swapped under warranty, upgraded, or changed by a previous owner.
The serial number is printed on the radio itself, so the code we give you matches the radio in front of you. It is also how we can check it for free before you pay. Main dealers often charge £30–£130, and you usually have to book the car in.
Jeep Wrangler radio code questions
Where is the serial on a Wrangler radio?
On the label on the radio case, so the radio has to come out.
Is the code four numbers?
Yes, on the radios we can do.
My Wrangler is a 2014 with a touchscreen.
That system is matched to the vehicle, so there is no serial code for it.
How much is a Jeep Wrangler radio code?
£9.99 per code. The free check comes first, so you only pay once we know we can do it, and you get your money back if the code doesn’t work.
How long does it take?
Most Jeep Wrangler codes appear on screen the moment you’ve paid, and we email you a copy. If yours has to be looked up by our team, we email it within 2 hours and tell you before you pay.
What if the code doesn’t work?
Check the serial first: 0 and O, or 1 and I, are easy to mix up. Still stuck? Tell us from your order page and we’ll put it right or refund you in full.
Another Jeep?
See every Jeep radio we can unlock on our Jeep radio code page, or pick a model: Cherokee, Grand Cherokee.
Updated September 2026