Which radio is in your Ford 3000 Traffic?
Ford fitted different radios over the years. Find your 3000 Traffic’s years below, but go by the serial: radios are often swapped, and the free check reads it for you.
What is printed on the label
People look these up because they are the only numbers on the radio that mean anything. A part number identifies the unit and is the same on every one ever built; the serial is yours alone and is the one we need. They are easy to mix up, so here is what to expect on a Ford 3000 Traffic.
| Printed on the unit | What it is |
|---|---|
| M123456 | The serial: one letter and six numbers. |
| xxxx-18K876-xx | The shape of a Ford finis part number, shared across the build. |
A part number on its own cannot produce a code — every radio of that model shares it. If the number you have is one of the part numbers above, keep looking for the serial: it is the longer one, and usually on a separate line or a barcode label.
How to find your Ford 3000 Traffic radio serial number
Most Ford 3000 Traffic radios show their serial on the screen, so you don’t need to take anything apart. The serial tells us exactly which code your radio needs.
On the screen
- Turn the ignition on and switch the radio on.
- Hold buttons 2 and 6 together for 2–3 seconds.
- Watch the screen: the serial scrolls past, usually last. Write down the letter and 6 numbers.
- Nothing? Try buttons 1 and 6 instead. Still nothing? The serial is also on a label on the radio itself.
On the label
The serial is also printed on a label on the top or side of the radio. Most radios slide out with a pair of radio removal keys (a few pounds from any car parts shop). Push them into the slots on the front until they click, then ease the radio forward. Some have screws to undo first.
Take a photo of the label rather than copying it by hand: it’s easy to mix up 0 and O, or 1 and I.
Tips for your Ford 3000 Traffic
- Hold presets 2 and 6 with the radio on. If nothing scrolls, the unit comes out on four release keys.
- Some of the earliest of these take a three-number code rather than four. The free check works out which yours is.
What your serial looks like
-
M123456Ford M-series (Visteon)M and 6 numbers Instant -
123456Older Ford (3-number code)Last 6 numbers of the serial Instant
Can’t find it or can’t read it? Send us a photo of the label: £9.99, with a full refund if we can’t find your code.
How to enter your Ford 3000 Traffic radio code
Once you have your code, key it in like this. The example below shows the button presses. Your order page shows the same steps next to your code.
- Press button 1 until the first number of your code shows. Do the same with buttons 2, 3 and 4.
- Press button 5 to finish (Land Rover: the right-hand arrow button).
- Code not accepted? The screen shows LOCKED and a number. Stop before it gets to 10 and read our locked radio help.
- Set each of the 3 numbers with the numbered buttons.
- Finish as your handbook shows (usually button 5).
If your Ford 3000 Traffic radio says LOCKED, WAIT or SAFE
Each wrong code makes the radio wait longer before the next try, and some radios lock for good after too many. Don’t guess: get the right code first, then follow the steps for your radio.
| Radio | What to do |
|---|---|
| Ford M-series (Visteon) | LOCKED 10: leave the radio and ignition on for about an hour, then try again, or hold button 6 for 10 seconds to get 3 more tries. LOCKED 13 means those tries are used up: the radio then needs a Ford dealer or a radio specialist. |
What LOCKED, WAIT and SAFE mean, and how long to wait →
Why we use your radio’s serial, not your number plate
A radio code belongs to the radio, not the car. A dealer usually looks it up from the Ford 3000 Traffic’s number plate or VIN (the 17-character number in your logbook), which only works if the car still has the radio it left the factory with. Radios are often swapped under warranty, upgraded, or changed by a previous owner.
The serial number is printed on the radio itself, so the code we give you matches the radio in front of you. It is also how we can check it for free before you pay. Main dealers often charge £30–£130, and you usually have to book the car in.
Ford 3000 Traffic radio code questions
My 3000 only wants three numbers.
Early Fords used a three-number code. Type the serial into the free check and it will tell you which your radio takes before you pay.
How much is a Ford 3000 Traffic radio code?
£9.99 per code. The free check comes first, so you only pay once we know we can do it, and you get your money back if the code doesn’t work.
How long does it take?
Most Ford 3000 Traffic codes appear on screen the moment you’ve paid, and we email you a copy. If yours has to be looked up by our team, we email it within 2 hours and tell you before you pay.
What if the code doesn’t work?
Check the serial first: 0 and O, or 1 and I, are easy to mix up. Still stuck? Tell us from your order page and we’ll put it right or refund you in full.
Updated September 2026