Which radio is in your Dodge Caliber?
Dodge fitted different radios over the years. Find your Caliber’s years below, but go by the serial: radios are often swapped, and the free check reads it for you.
How to find your Dodge Caliber radio serial number
The serial isn’t shown on the screen: it is printed on a label on the radio itself. The serial tells us exactly which code your radio needs.
On the label
- Take the radio out.
- Read the 4-character serial on the label on the radio.
Take a photo of the label rather than copying it by hand: it’s easy to mix up 0 and O, or 1 and I.
Most radios slide out with a pair of radio removal keys (a few pounds from any car parts shop). Push them into the slots on the front until they click, then ease the radio forward. Some have screws to undo first.
Tips for your Dodge Caliber
- Take the radio out and photograph the label: the serial may be four characters or fourteen.
- MyGIG touchscreens aren’t ones we can do.
- These are looked up by hand and emailed within 2 hours.
What your serial looks like
-
E3NEChrysler / Dodge VP4 letters and numbers Instant -
TQ1AA1500E2884Jeep Cherokee14 letters and numbers By email -
1234Chrysler / Jeep / Dodge Panasonic TM94 numbers Instant
Can’t find it or can’t read it? Send us a photo of the label: £9.99, with a full refund if we can’t find your code.
How to enter your Dodge Caliber radio code
Once you have your code, key it in like this. Your order page shows the same steps next to your code.
- Set each number with the numbered buttons, then confirm.
- Set each number with the numbered buttons, then confirm.
- Code not accepted? Email us and say whether your radio has 5 or 6 numbered buttons.
- Set each number with the numbered buttons, then confirm.
If your Dodge Caliber radio says LOCKED, WAIT or SAFE
Each wrong code makes the radio wait longer before the next try, and some radios lock for good after too many. Don’t guess: get the right code first, then follow the steps for your radio.
What LOCKED, WAIT and SAFE mean, and how long to wait →
Why we use your radio’s serial, not your number plate
A radio code belongs to the radio, not the car. A dealer usually looks it up from the Dodge Caliber’s number plate or VIN (the 17-character number in your logbook), which only works if the car still has the radio it left the factory with. Radios are often swapped under warranty, upgraded, or changed by a previous owner.
The serial number is printed on the radio itself, so the code we give you matches the radio in front of you. It is also how we can check it for free before you pay. Main dealers often charge £30–£130, and you usually have to book the car in.
Dodge Caliber radio code questions
Where is the Caliber radio serial?
On the label on the radio case.
How long does the code take?
We look these up by hand and email them within 2 hours.
Nothing on my radio asks for a code.
Then nothing is locked — some of these radios only ask after the battery has been off.
How much is a Dodge Caliber radio code?
£9.99 per code. The free check comes first, so you only pay once we know we can do it, and you get your money back if the code doesn’t work.
How long does it take?
Most Dodge Caliber codes appear on screen the moment you’ve paid, and we email you a copy. If yours has to be looked up by our team, we email it within 2 hours and tell you before you pay.
What if the code doesn’t work?
Check the serial first: 0 and O, or 1 and I, are easy to mix up. Still stuck? Tell us from your order page and we’ll put it right or refund you in full.
Another Dodge?
See every Dodge radio we can unlock on our Dodge radio code page, or pick a model: Nitro.
Updated September 2026